Mamiya ZD Back - Preparing the Lithium Ion Battery PB401 for Mamiya ZD Back

21
Preparing the Mamiya ZD Back
Preparing the Lithium Ion Battery PB401 for Mamiya ZD Back
1. Plug in the battery charger PC401.
Plug one end of the power cord into the battery charger PC401 and plug
the other end into a power outlet.
2. Charge the battery.
Insert the Lithium ion battery PB401 supplied with the camera into the bat-
tery charger PC401 as illustrated. The charging lamp lights and charging
starts automatically. When the charging lamp lights-out, charging is fin-
ished.
MEMO
• It will take about two hours to charge the battery for the first time when new.
•For instructions on how to use the battery charger PC401, refer to the manual for the charger.
The charging lamp
02_ZDback_E_p021-030 07/3/9, 20:3821