11N Mini Wireless AP
14
Clone Mac Address: You can configure the MAC address of the WAN.
2. If your ISP provides the DHCP service, please select DHCP Client option, and the AP’s
will automatically get IP parameters from your ISP. You can see the page as follows:
Host Name: This option specifies the Host Name of the AP.
MTU Size: The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU Size
unless required by your ISP.
Set DNS Manually: If your ISP gives you one or two DNS addresses, select Set DNS
Manually and enter the primary and secondary addresses into the correct fields.
Otherwise, the DNS servers will be assigned dynamically from your ISP.
Clone Mac Address: You can configure the MAC address of the WAN.
3. If your ISP provides a PPPoE connection, select PPPoE option. And you should enter
the following parameters:
To Next Page
Loading...
