EasyManuals Logo

Manitowoc Sotto UG-40 Technician's Handbook

Manitowoc Sotto UG-40
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Part Number: 040006847 12/19 39
Detailed Descaling & Sanitizing Procedure
,
Caution
Use only Manitowoc approved cleaner/descaler
(Part Number 9405463) and sanitizer (Part Number
9405653). Failure to follow the instructions on the
label will violate relevant laws. Read and understand
all instructions on the package before use.
Do not mix the cleaner/descaler and sanitizer solutions
together. Failure to follow the instructions on the label
will violate relevant laws.
n
Warning
When handling cleaners and sanitizers, wear rubber
gloves and safety goggles (and/or face shield).
Cleaner/descaler is used to remove lime scale or other
mineral deposits. Sanitizer is used to remove algae or
slime.
Step 1 Set the toggle switch to the OFF position at
the end of a harvest cycle, after ice releases from the
evaporator. Or, set the switch to the OFF position and allow
the ice to melt off the evaporator.
,
Caution
Never use anything to force ice from the evaporator.
Damage may result.
Step 2 Remove all ice from the bin.
Step 3 Remove all parts as described in “Component
Removal” on page 43.

Table of Contents

Other manuals for Manitowoc Sotto UG-40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Sotto UG-40 and is the answer not in the manual?

Manitowoc Sotto UG-40 Specifications

General IconGeneral
BrandManitowoc
ModelSotto UG-40
CategoryIce Maker
LanguageEnglish

Related product manuals