Marantz PM5004 User Manual

2
ENGLISH
Current feedback amplifi er
This unit uses a high-speed current feedback amplifi er circuit for
its preamplifi er and power amplifi er so that signals from the Super
Audio CD player can be amplifi ed with high fi delity. The high-speed
current feedback amplifi er reproduces a natural sound space.
High-power output
This unit features a slimline body, but comes with a large power
supply unit for dynamic music reproduction with high power.
High quality audio design
This unit has a high quality audio design such as minimized signal
path, use of high sound quality parts, and large power circuit, which
is possible only in discrete audio components.
PHONO input terminal for connecting a turntable
This unit is provided with a phono amplifi er so that you can directly
connect a turntable and play records. (Only the MM cartridge can
be used (vpage7).)
Two-sets of speaker output terminals
Besides getting separate sound output from two sets of speakers,
you can easily connect this unit to speakers that support bi-wiring
connection (separately connects the low and mid/high jacks of the
speaker to the amplifi er). The unit adopts screw terminals that can
connect thick audio cables.
Main features
Tone control function
This unit has a tone control function for adjustment of bass (low
frequency) and treble (high frequency) sound to produce your
preferred tone (vpage9).
LOUDNESS function
This unit is provided with a LOUDNESS function that makes it
easier to hear music played back at a low volume level (vpage9).
Wireless remote control
The wireless remote control of this unit can also operate Marantz
audio components such as a CD player (vpage5).
This remote is provided with three sets of remote control codes.
You can set a different remote control code for up to three
amplifi ers and control them independently from one location.
1.PM5004NENG校了.inddSec1:21.PM5004NENG校了.inddSec1:2 2010/05/2020:24:452010/05/2020:24:45

Marantz PM5004 Specifications

General

Damping factor	100
Amplifier class	-
Frequency range	10 - 50000 Hz
Input sensitivity	200 mV
Audio output channels	2.0 channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	85 dB
Total Harmonic Distortion (THD)	0.0001 %
Dynamic power per channel (4 Ohm)	60 W
Dynamic power per channel (8 Ohm)	45 W
RMS power output per channel (4 Ohm)	55 W
RMS power output per channel (8 Ohm)	40 W
Bridge-mode power output per channel (4 Ohm)	80 W
AC (power) in	Yes
Audio (L/R) in	6
Audio (L/R) out	2
Headphone outputs	1
Speakers connectivity type	RCA
Purpose	Home
Product color	Black
Connectivity technology	Wired
Power consumption (standby)	0.4 W
Power consumption (typical)	110 W

Weight and Dimensions

Depth	369 mm
Width	440 mm
Height	105 mm
Weight	6700 g