Marantz PMD620MKII - Factory Default

79
Perform the procedure below to restore the menu settings,
passcode, etc., to their factory defaults.
1.
Press the DISPLAY button and REC PAUSE button at the
same time, and turn the POWER switch ON. At this time, the
service menu list is displayed in the display section.
2.
Press the VOL + or VOL – buttons to select “Factory Default?”.
At this time, the selected menu item is highlighted.
3.
If the 1/3/ENTER button is pressed “Default?” is displayed in
the display section.
4.
While “Default?” is being displayed, press the 8 button and
select “YES”.
5.
If the 1/3/ENTER button is pressed “Executing ...” flashes in
the display section.
• When the settings have returned to the factory default
settings, “Completed” is displayed for 1 second, after
which the display section returns to the service menu.
• Whenthesettingshavebeenreturnedtothefactorydefault
settings, the “Date Form” default setting is the setting for
the US. This needs to be set correctly for the destination.
“Date Form”
US :M/D/Y
Europe:D/M/Y
6.
Turn the POWER switch OFF.
Factory Default