47
ENGLISH
6. PreRecord
When PreRecord is on and the PMD660 is in record
pause, it 'listens to' the selected audio input(s) and
continuously buffers 2 seconds of audio. When recording
begins, the 2 second pre record buffer is written at the
beginning of the new track. The 2 seconds give you time
to start recording without missing the first seconds of
audio.
1. From stop, push the MENU/STORE EDIT button.
2. Push the or button to select Preset1, 2 or 3.
3. Push the ENTER button to accept the selected Preset.
4. Push the or button so PreRecord is displayed.
5. Push the ENTER button while PreRecord is displayed.
The PreRecord choice (On or Off) is flashing.
6. Push the or button to tab through the
PreRecord choices.
7. When correct, push the ENTER button.
Display returns to PreRecord.
8. Push the or button to select other Menu
choices for editing. When editing the Preset is
complete, push the MENU/STORE EDIT button to
store the changes, or push the STOP/CANCEL button
to exit Menu mode without making any changes.
9. Display returns to stop mode.
7. Manual Trk
When Manual Trk incrementing is On during recording,
push the REC button to increment the track. A new track is
created at that point. A slight break might be heard during
playback.
1. From stop, push the MENU/STORE EDIT button.
2. Push the or button to select Preset 1, 2 or 3.
3. Push the ENTER button to accept the selected Preset.
4. Push the or button so Manual Trk is displayed.
5. Push the ENTER button while Manual Trk is displayed.
The Manual Trk choice (On or Off) is flashing.
6. Push the or button to tab through the Manual
Trk choices.
7. When correct, push the ENTER button.
Display returns to Manual Trk.
8. Push the or button to select other Menu
choices for editing. When editing the Preset is
complete, push the MENU/STORE EDIT button to
store the changes, or push the STOP/CANCEL button
to exit Menu mode without making any changes.
9. Display returns to stop mode.
To Next Page
Loading...
Need help?
General
