53
ENGLISH
14. AutoPowOff
If the PMD660 is not used for 15 minutes during stop or play
- pause, power can be automatically shut off to conserve
battery life.
1. From stop, push the MENU/STORE EDIT button.
2. Push the or button to select Preset 1, 2 or 3.
3. Push the ENTER button to accept the selected Preset.
4. Push the or button so AutoPowOff is
displayed.
5. Push the ENTER button while AutoPowOff is displayed.
The AutoPowOff choice (On or Off) is flashing.
6. Push the or button to tab through the
AutoPowOff choices.
7. When correct, push the ENTER button.
Display returns to AutoPowOff.
8. Push the or button to select other Menu
choices for editing. When editing the Preset is
complete, push the MENU/STORE EDIT button to
accept the changes, or push the STOP/CANCEL
button to exit Menu mode without making any
changes.
9. Display returns to stop mode.
15. Battery
The PMD660 operates on 4 standard AA size Alkaline, or
Ni-MH batteries.
1. From stop, push the MENU/STORE EDIT button.
2. Push the or button to select Preset 1, 2 or 3.
3. Push the ENTER button to accept the selected Preset.
4. Push the or button so Battery is displayed.
5. Push the ENTER button while Battery is displayed.
The Battery choice (Alkaline or NiMH) is flashing.
6. Push the or button to tab through the Battery
choices.
7. When correct, push the ENTER button.
Display returns to Battery.
8. Push the or button to select other Menu
choices for editing. When editing the Preset is
complete, push the MENU/STORE EDIT button to
accept the changes, or push the STOP/CANCEL
button to exit Menu mode without making any
changes.
9. Display returns to stop mode.