Marantz SR6005 - User Manual

Other manuals for Marantz SR6005

Model Information22 pages

Specifications2 pages

Questions and Answers

D
Donna Anderson DVMAug 27, 2025
Why is there no sound from the subwoofer connected to my Marantz Stereo Receiver?
- J
  Jordan GriffinAug 27, 2025
  If no sound is produced from the subwoofer connected to your Marantz Stereo Receiver: 1. Check the subwoofer connections. 2. Turn on the subwoofer’s power. 3. Set “Speaker Config.” – “Subwoofer” on the menu to “Yes.” 4. If “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected surround mode.
L
lramirezAug 26, 2025
Why is there no sound from the front height speaker on my Marantz Stereo Receiver?
- R
  Rhonda ScottAug 27, 2025
  If there is no sound from the front height speaker on your Marantz Stereo Receiver, set “Amp Assign” on the menu to “Normal.” Also, set “Speaker Config.” – “F.Height” on the menu to something other than “None.”
P
porterandrewAug 25, 2025
Why is there no sound from the surround back speaker on my Marantz Stereo Receiver?
- C
  Christine RichardsAug 26, 2025
  If there is no sound from the surround back speaker of your Marantz Stereo Receiver, set “Amp Assign” on the menu to “Normal.” Also, set “Speaker Config.” – “S.Back” on the menu to something other than “None.” Finally, ensure the surround mode is not set to “STEREO.”
C
Christina WilliamsAug 25, 2025
Why is there no audio output from my Marantz Stereo Receiver?
- G
  Gregory GuzmanAug 25, 2025
  If there's no audio output from your Marantz Stereo Receiver, consider the following: 1. Check all device connections and speaker connections to ensure they are secure. 2. Verify that the audio device is powered on. 3. Adjust the master volume and ensure mute mode is off. 4. Select a suitable input source and input mode. 5. If headphones are connected, disconnect them.

Summary

SAFETY PRECAUTIONS

General Safety Instructions

Essential safety warnings and operating instructions to prevent hazards.

INSTALLATION GUIDELINES

Cautions on Installation

Recommendations for proper unit placement and ventilation.

UNIT FEATURES

Core Features Overview

Details on discrete channels, HDMI support, and audio technologies.

GETTING STARTED

Simple Setup Guide

Step-by-step guide for initial setup and basic operation.

SPEAKER SETUP

Audyssey Auto Setup

Automatic speaker calibration for optimal sound.

CONNECTIONS

Connecting External Devices

Instructions for connecting various audio and video sources.

PLAYBACK OPERATIONS

Basic Playback Controls

Selecting sources, adjusting volume, and basic playback.

MANUAL SETUP

Speaker Configuration Details

Manual settings for speaker size, presence, and bass reproduction.

REMOTE CONTROL OPERATIONS

Registering Preset Codes

Programming the remote to control other devices.

TROUBLESHOOTING

Common Issues and Solutions

Solutions for common operational and audio issues.

SPECIFICATIONS

Technical Specifications

Detailed performance data for audio, video, tuner, and general sections.

SYSTEM RESET

Microprocessor Reset Procedure

Steps to reset the unit to factory default settings.

Marantz SR6005 Specifications

General

Channels	7.1
Power Output	110W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Inputs	6
HDMI Outputs	1
Dolby Technologies	Dolby TrueHD, Dolby Digital Plus, Dolby Pro Logic IIz
Networking	No
3D Support	Yes
Audio Return Channel (ARC)	Yes
Phono Input	Yes
Total Harmonic Distortion	0.08%
Signal-to-Noise Ratio	100 dB
Input Sensitivity	200 mV
USB Port	Yes
DTS Technologies	DTS-HD Master Audio, DTS Neo:6
Multi-room	Yes
Frequency Response	10Hz-100kHz
Video Upconversion	Yes