Default Settings
On delivery the M1100 scale has the following default settings:
1
• Zero tracking ON
• Automatic tare OFF
• Automatic recording
OFF
• All memories are set to zero except the following:
− Packing memory 1 is configured with upper and lower weight
limits
− Grading memory 1 is configured with lower grade limits for all
nine grades.
2
Communication
The following communication options are available for the M1100 scale:
•
CAN. The M1100 is specially designed to operate in a networked
environment (CANopen). When the scale is connected to this type of
network, the network can supply the power.
•
RS-232. The M1100 can communicate with external equipment
using RS-232. Weighing results can be printed on an external label
printer or the data can be transmitted to a PC for storing and further
processing.
1
See “ ” on page 34 for detailed information on how to change these settings. Setup Mode Commands
2
See “ ” on page 27 for instructions on how to change these limits and set up more memories. Editing a Memory
User’s Guide The M1100 Scale • 7
To Next Page
Loading...
