Positive grading:
Using this method you can place one item at a time in a tray on the
weighing platform, automatically record the weighings, and display each
item’s grade on the Config Display.
To use positive grading
1 Select grading memory and grading method ( ).
2 Place a tray on the platform and place the items in the tray,
one by one.
The grade number for each item appears on the Config
Display.
To stop using positive grading
♦ Change the grading method by:
− changing to a memory that does not have positive grading
specified as grading method
or by
− remaining in the same memory and selecting a new grading
method.
Unit of Weight
The unit of weight can be different for each packing or grading memory.
When you change to a new memory with a new target weight, the weight
on the Weight Display will be in the unit of weight set for the new target
weight. The unit of weight is displayed to the right on the Weight
Display.
Example:
The target weight in packing memory is in kilograms and the weight in memory
is in pounds. When you switch from memory to memory
, the unit of weight
changes from kg to lb.
IMPORTANT! Watch the Zero indicator when the scale is in use. The
Zero indicator should light up when the platform is empty.
If not, you must re-zero the scale by pressing the ZERO key. In case
of an unsuccessful re-zeroing with the ZERO key, you must take a new
initial zero by turning the power off and then on again, or by pressing the
arrow, the MENU and ZERO keys simultaneously.
26 • Basic Operation M1100, U2 & C2-3.3
To Next Page
Loading...
