Glossary of Terms
Accept indicator
On the M1100 Indicator. Lights up with a green light, if the weight on the
platform is within the set weight limits (only in packing mode).
Calibration
For marine calibration see Motion compensation.
Commands
See Edit and Setup Mode commands.
Config Display
A display on the M1100 scale that shows the current packing or grading
memory. The display is also used to show configuration commands.
Edit commands
Used to revise the settings for the packing or grading memories.
Extended mode
An operating mode activated by setting application switch A04 to ON.
The number of available packing memories increases from five to fifteen.
Grade limit
A lower limit is specified for each grade in a grading memory. No upper
limit is specified, the lower limit of the following grade becomes the
upper limit of the previous grade.
Grading memory
An area in the M1100 computer programmed with parameters used for
the grading: unit of weight and lower grade limit.
Indicator
See M1100 Indicator.
Lower weight limit
A value indicating the minimum value for an acceptable weight.
M1100
The Marel M1100 Packing & Grading Scale, the marine or land based
type.
M1100 Indicator
The display unit for the M1100 scale.
User’s Guide Glossary of Terms • 49
To Next Page
Loading...
