Max
The maximum value of a single range scale.
Max1
The maximum value of the lower range in a dual range scale.
Max2
The maximum value of the higher range in a dual range scale.
Motion compensation
A procedure for correcting the marine scale’s weighing stability and
accuracy while the platform is in motion.
Multiple range
On scales with two or more weighing ranges with different maximum
capacities and different scale intervals for the same weighing platform,
each range extending from zero to its maximum capacity.
Over indicator
On the M1100 Indicator. Lights up with an orange light, if the weight on
the platform is above the set upper weight limit (only in packing mode).
Packing memory
An area in the M1100 computer programmed with parameters used for
the packing: weighing unit, upper and lower weight limits.
Password
Used to limit unauthorized access to the Setup Mode where settings for
the scale’s setup can be changed.
Preset tare
A fixed tare value (see Tare) specified by the user.
Range
See Weighing range.
Resolution
The number of divisions in the total weighing interval.
Example: If the weighing interval is 15 kg and the division (e) is 5 g, the
resolution is 1:3000.
Setup Mode commands
Used to change the setup settings for the M1100 scale.
Steady indicator
On the M1100 Indicator. Lights up with a green light, when the weight
on the platform is stable.
Tare
The weight of the container on the platform and the allowance made for
the container when weighing.
Weight limit
See Upper or Lower weight limit.
50 • Glossary of Terms M1100, U2 & C2-3.3
To Next Page
Loading...
