Marksman MCU-100N User Manual

38
<ALL SETUP LOAD>
F1 : M_MENU F2 : A_MARK F3 : EDIT F4 : FILE
F5 : SETUP F6 : TEST F7 : LOAD F8 : COMM
FILE NAME [ ]
STATUS [ ]
[ALL SETUP LOAD]
F4 : SEQUENCE DATA SAVE
FILENAME DATA TIME
>< NO FILE >
The function that to load setting value in controller stores to the SD card.
Storing is the backup function of the data. When the set value data was disappeared by
an error of the controller and interruption of electric power, you can use that function.
Storing finish normally, be shown the message “LOAD DATA OK” on the status screen
.
<ALL SETUP SAVE>
F1 : M_MENU F2 : A_MARK F3 : EDIT F4 : FILE
F5 : SETUP F6 : TEST F7 : LOAD F8 : COMM
FILE NAME [ ]
STATUS [ ]
[ALL SETUP SAVE]
F4 : MARKING DATA LOAD
FILENAME DATA TIME
>< NO FILE >
The function that inputted the set value of controller stores to the SD card.
Storing is the backup function of the data. When the data was disappeared by an error of the controller
and interruption of electric power, you can use that function.
Storing finish normally, will be shown the message “SAVE DATA OK” on the status screen.
.

Marksman MCU-100N Specifications

General

Brand	Marksman
Model	MCU-100N
Category	Controller
Language	English