JS-1000V 4.0 Marking Program construction
<<F2 MARK MENU>>
1. Function of ICON on the top of screen are as following .
- F2 Mark : Can give START, STOP , RESET signal to the controller.
- F3 Edit : Modify the data and import saved data on the s/w.
- F4 Setup : Adjust the step of motor and timing of sol. valve..
- F5 Load : Can load PLT file and USER font to the controller.
- F6 Option : Can select the port of JS_1000 S/W and single and multi block.
Comport no. between the P.C and S/W must be always same
- File : Can save and import marking data.
- About : Information of JS_1000 S/W.
2. Function of ICON on the bottom of screen are as following.
- Blk No : Block No..
- Unit No : Marking quantity .
- Mark Up To : Indicates the no. of specify quantity marking.
- Status : Status of marking machine.
- RUN : Start signal for marking.
- HOME : Return to home position.
- STOP : Emergency stop.
3. Marking data is indicated in the middle of screen.
Can not modify the data on this screen.
To Next Page
Loading...