MR 150M–1050M SINGLE – MXIII CONTROLLER
1
COMMERCIAL AND INDUSTRIAL PRODUCT WARRANTY
Marlo Incorporated warrants all water treatment products manufactured and/or distributed by it to be free from defects
in materials and workmanship for a period of one (1) year from installation or 18 months from the date of shipment
whichever comes rst. Fiberglass pressure vessels are warranted against defects in materials and workmanship for a
period of ve (5) years from the date of shipment.
If during that period any products shall be proven to the Marlo Incorporated’s satisfaction to be defective, those
products will be replaced FOB factory or the price refunded at the Marlo Incorporated’s option.
Marlo Incorporated’s obligations for non-performance, defects, or any damage caused by its products or their use,
and buyer’s exclusive remedy therefore, shall be limited to product replacement or refund and shall be conditioned
upon Marlo Incorporated’s receiving written notice together with a demand for such replacement or refund.
The foregoing warranty is exclusive and in lieu of all other expressed or implied warranty (except of title)
including but not limited to implied warranty of merchantability and tness for particular purpose.
Marlo Incorporated will not be subject to and disclaims the following:
1. Any other obligations or liabilities arising out of breach of contract or out of warranty.
2. Any obligations whatsoever arising from tort claims (including negligence and strict liability) or arising under other
theories of law with respect to products sold or services rendered by Marlo Incorporated or any undertakings, acts,
or omissions relating thereto.
3. All consequential, incidental, and contingent damages.
Labor charges, charge backs or handling charges are excluded from Marlo Incorporated’s warranty provisions.
COMMERCIAL AND INDUSTRIAL WATER SOFTENER GUARANTEE
Under normal operating conditions:
1. The softener euent shall be zero soft as determined by a soap test.
2. The loss of softening resin through attrition during the rst three (3) years shall not exceed 3% per year.
3. The softening resin shall not be washed out of the system during backwash.
4. The color and turbidity of the softener euent shall not be greater than the incoming water.
To Next Page
Loading...