Mx receiver firmware 08.05.03 or later
Dock 01.01.01 or later
Firmware and Features
This section describes the firmware and features that must be configured on MASP to
set up the sensor.
To be operational, the sensor needs to be configured with two files:
• a firmware file (*.A2F): it is the firmware of the sensor,
• an application file (*.A2A): it defines the sensor features and options.
These files are generated via MASP.
Firmware
The latest version of the firmware is available for download on MASP.
Compatibility: F450-02.02.02 and aer
Features and Options
The features and options are configurable according to the type of hardware and
customer's choices.
Features • Product name: Manually entered.
• Application: Catch Navigator
• Body: Small
• Battery capacity (not configurable): 1-
pack
Sounding Options • Down
• Down2
Misc. options • SD Card Log: records a log of the sen
sor activity. This option is useful for trou
bleshooting support.
• High Resolution (always activated)
Catch Navigator | V1 |
Introduction and Presentation
8
To Next Page
Loading...
