Need help?Do you have a question about the Marport Catch Sensor and is the answer not in the manual?
Important safety precautions and best practices for handling and using the equipment.
Procedure for downloading and installing the Mosa configuration software.
Steps to establish a Bluetooth connection between the sensor and Mosa.
Procedure to calibrate the catch sensor for accurate fill status detection.
How to test the catch sensor's empty/full status after calibration.
Detailed configuration settings for the Catch Explorer sensor.
Setting parameters for uplink and down soundings for Catch Explorer.
Procedure to calibrate sensor for consistent target strength readings.
Adjusting sensor uplink power to improve signal transmission.
Downloading and updating the sensor firmware to the latest version.
Procedure for adding sensors to the receiver system.
Resolving problems with firmware files not being read by Mosa.
Troubleshooting Mosa not opening due to security preferences.
Addressing issues with wrong data or noisy echograms in Scala.
Troubleshooting fixed blue echograms and incorrect Catch Explorer images.
Resolving slow detection or connection issues between sensor and Mosa.
Fixing issues where catch status remains permanently full or empty.
General| Category | Accessories |
|---|---|
| Type | Catch Sensor |
| Brand | Marport |
| Purpose | Monitoring fishing activities |
| Underwater Sensor | Yes |
To Next Page