Catch Sensors | V1 | Introduction and Presentation
Description
Firmware
About Catch Firmware
• Standard Catch firmware is compatible with Marport and Scanmar systems. Sensors
emit at a frequency around 40kHz.
• Catch hybrid 70 firmware is compatible with Marport, Scanmar, Simrad and Wesmar
systems. Sensors can emit at 2 frequencies: 40kHz (Marport, Scanmar) and 70kHz
(Simrad, Wesmar).
• Catch hybrid PI firmware is compatible with Simrad PI, Marport and Scanmar systems.
Sensors can communicate with Simrad PI and Marport or Scanmar systems at the
same time.
Product Name Firmware Name Firmware Number
Catch FIRM001
Catch with depth FIRM017
Catch with depth, temp FIRM018
Catch with pitch & roll FIRM002
Catch with pitch & roll,
depth
FIRM022
Catch with pitch & roll,
temp
FIRM019
Catch with pitch & roll,
depth, temp
FIRM023
Catch
Catch with temp FIRM016
Catch hybrid70 FIRM005
Catch hybrid70 with depth FIRM025
Catch hybrid70 with depth,
temp
FIRM006
Catch hybrid70 with depth,
temp, pitch & roll
FIRM008
Catch hybrid70 with pitch &
roll
FIRM007
Catch hybrid70 with depth,
pitch & roll
FIRM027
Catch hybrid70 with pitch &
roll, temp
FIRM026
Catch hybrid 70
Catch hybrid70 with temp FIRM024
Catch hybrid PI
Catch hybrid sensor (Simrad
PI + 70 kHz)
FIRM033
| 11
To Next Page
Loading...