Catch Sensors | V1 | Introduction and Presentation
Applications
Here are some examples of data received from Catch Explorer and Catch sensors
displayed in Scala.
Catch Control System Installation
You can install several sensors on the codend to better follow the filling processes. It is
very useful to determine the amount of fish inside the trawl net: you can prevent damage
to fish and increase the security of crew and vessel.
For example, you can install three sensors on the codend. They will trigger one by one,
according to the amount of fish inside the codend. After a few tows, you can estimate the
amount of tonnage of fish that you have depending on whether one, two or three sensors
display a full status.
| 7
To Next Page
Loading...