marposs IWAVE2 - Page 26

26 / - Instruction Manual
3.2
Stand charger
General characteristics
Power supply
24V CC +/- 10%, 0,15 A
(Must be S.E.L.V. type, see Note
below)
Weight
1,5 Kg
Environment
5°C - 45°C
maximum 80% relative humidity
Degree of protection
IP 54
Position Dry (EN 61010-1)
Type of installation / use indoor
Impact energy level
IK07 (energy level applied: 2 joules)
Clause 8.2.2 standard EN 61010-1:
2010
i
S.E.L.V.: Safety Extra Low Voltage as defined in EN60950-1.
3.2.1 Power Supply
Power supply for single charger cod.
2T0IRCS010
Input
100-240V~ / 50-60 Hz / 0,63 mA
Output
24V / 0,63A
Power supply for multiple charger cod.
2T0IRSS010
Input
100-240V~ / 50-60 Hz / 1,25 mA
Output
24V / 1,25A
Altitude
Max 5000 m
Pollution degree
2 (EN 61010-1)
Degree IK
IK07
As from method EN 61010-1 clause 8.1 the
impact test with ball
Environment
5°C - 45°C
maximum 80% relative humidity
Position
Dry (EN 61010-1)
Type of installation / use indoor
Overvoltage Category
II (EN 61010-1)
Type of connection to the AC network
F-N-PE