6 MAC III Wash user manual
Introduction
Thank you for selecting the Martin™ MAC III Wash™. This moving-head washlight features:
• CMY color mixing plus color wheel
• Variable CTO
• Internal barndoors with continuously variable opening and 110° rotation
• 1:4 linear zoom with no lumen drop or internal lens changes
• Fresnel lens
• Optional PC lens
• Full-range mechanical dimmer with four dimming curve options, plus mechanical shutter
•Iris
• 1500 watt high-output discharge lamp with semi-hot restrike (< 90 seconds)
• Backlit graphic display and battery power (mains power not required for fixture setup)
• 540° of pan and 268° of tilt with user-settable pan/tilt limits
• Electronic “flicker-free” ballast and auto-sensing switch-mode power supply.
For the latest firmware updates, documentation, and other information about this and all Martin Professional
products, please visit the Martin website at http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:
Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.
Unpacking
The MAC III Wash is packaged in either a cardboard box or a flightcase that is designed to protect the
product during shipment. The following items are included:
• 1500 W discharge lamp (installed)
• 2 omega brackets for clamp attachment
• This user manual
Using for the first time
Before applying power to the fixture:
• Carefully review the safety information starting on page 4.
• Prepare a power cable (see “Power connection” on page 7).
• Check that the tilt lock is released (see “Tilt lock” on page 30).
• Check that the base is fastened securely so that the torque reaction when the head is panned does not
cause the fixture to move.
When powered up, check lamp alignment as described on page 10.
Packing
Important! Release the tilt lock before repacking in the flightcase.
The tilt lock must be released during transportation in the MAC III flightcase.
To Next Page
Loading...
Need help?
General
