Masimo Radical-7 - Page 164

Radical-7 Chapter 6: Alarms and Messages
www.masimo.com 162 Masimo
Replace Sensor Message
Message:
•
(Pulse CO-Ox) Replace Sensor , or
•
(RAM) Replace Sensor
Reusable sensor has used all its available monitoring time, sensor is non-
functional, or defective sensor.
Next steps: Replace sensor.
Replace Cable Message
Message:
•
(Pulse CO-Ox) Replace Cable , or
•
(RAM) Replace Cable
The patient cable is non-functional or the life of the cable has expired.
Next steps: Replace the patient cable.
Replace Adhesive Sensor Message
Message:
•
(Pulse CO-Ox) Replace Adhesive Sensor , or
•
(RAM) Replace Adhesive Sensor
When a single-patient-use sensor is used, the adhesive portion of the
sensor is non-functional, or the life of the adhesive portion of the sensor
has expired.
Next steps: Replace the adhesive portion of the sensor.