Massimo MSU 800 - To Change the Engine Oil

8-8
To Change the Engine Oil (With or With-
out Oil Filter Cartridge Replacement)
1. Remove the console. (See page 8-9 for
console removal and installation
procedures.)
2. Place an oil pan under the engine to
collect the used oil, and then remove the
engine oil filler cap.
3. Remove the engine oil drain bolt to drain
the oil from the crankcase.
1. Engine oil drain bolt
NOTE:
Skip steps 4-6 if the oil filter cartridge is not
being replaced.
4. Remove the oil filter cartridge with an oil
filter wrench.
1. Oil filter cartridge 2. Oil filter bolt
NOTE:
An oil filter wrench is available at a nearby
dealer.