4-10
Switches
1. Light switch “OFF/ 2。Light switch “OFF ”
Light Switch “OFF/ / ”
Set the switch to “ ”to turn on the low
beam and the taillights.
Set the switch to “ ”to turn on the high
beam and the taillights.
Set the switch to “OFF” to turn off all lights.
1
CAUTION:
Do not use the headlights with the engine
turned off for an extended period of time. The
battery may discharge to the point that the
starter motor will not operate properly. If this
should happen, remove the battery and
recharge it.
To Next Page
Loading...
