8-45
7. Install the bulb holder by pushing it in and
turning it clockwise.
8. Install the bulb holder cover and the
cover at the rear of the headlight.
1CAUTION:
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and
seated properly.
9. Close the hood.
10. Adjust the headlight beam if necessary.
Tail/Brake Light Bulb Replacement
If a tail/brake light bulb burns out, replace it
as follows:
1. Remove panel A (if replacing the left
tail/brake bulb) or panel B (if replacing
the right tail/brake bulb) by removing the
quick fasteners and bolts.
1. Panel A
1. Panel B
To Next Page
Loading...
