7-13
1CAUTION：
：：
：
After riding your vehicle in water, be sure to
drain the trapped water by removing the
check hose at the bottom of the air filter case,
the CVT-belt cooling duct check hose, the
drive select lever box check hose and the
CVT-belt case drain plug. Wash the vehicle
in fresh water if it has been operated in salt
water or muddy conditions.
Vehicle Immersion
CAUTION：
：：
：
If your vehicle becomes immersed, major
engine damage can result if the machine is
not thoroughly inspected. Take the vehicle to
your dealer before starting the engine.
If it’s impossible to take your vehicle to a
dealer before starting it, follow the steps
outlined below.
1. Move the vehicle to dry land.
2. Check the air box. If water is present, dry
the air box and replace the filter with a
new filter.
3. Remove the spark plugs.
4. Turn the engine over several times.
5. Dry the spark plugs and reinstall them, or
To Next Page
Loading...
