8-47
Replacing a Front Turning Light Bulb
If a front turning light bulb burns out, replace
it as follows.
1. Lift the hood up. (See pages 8-7-8-8 for
hood opening and closing procedures.)
2. Remove the cover at the rear of the front
turning light by pulling it off.
1. Cover at the rear of the front turning light
3. Remove the front turning light bulb holder
cover by pulling it off.
1. Front turning light bulb holder cover
4. Remove the front turning light bulb holder
by pushing it in and turning it counter
clockwise.
5. Remove the defective bulb by pulling it
out.
6. Insert a new front turning light bulb into
the bulb holder by pushing it in.
To Next Page
Loading...
