Massimo MSU 800 - To Change the Reduction Gear Box Oil8-11; Final Gear Oil

8-11
To change the Reduction Gear Box Oil
1. Remove oil inlet bolt
2. Remove oil outlet bolt, drain the oil of gear
box and screw up oil outlet bolt.
Final Gear Oil
3. Add sufficient engine oil
4. Screw up oil inlet bolt.
1. Oil inlet bolt
Tighlening torgue:
Oil inlet bolt: 24N.m (2.4m·kgf, 17 ft·lbs)
Oil outlet bolt: 24N.m (2.4m·kgf, 17 ft·lbs)
1. Oil outlet bolt
Recommended engine oil:
See page 10-2.
Oil quantity:
Without oil filter cartridge replacement:
1.05L (1.67 lmp qt, 2.01 US qt)
With oil filter cartridge replacement:
2.0 L (1.76 lmp qt, 2.11 US qt)