8-10
8. Add the specified amount of recomme-
nded engine oil, and then install the
engine oil filler cap and tighten it.
Recommended engine oil:
See page 10-2.
Oil quantity:
Without oil filter cartridge replacement:
1.05L (1.67 lmp qt, 2.01 US qt)
With oil filter cartridge replacement:
2.0 L (1.76 lmp qt, 2.11 US qt)
1CAUTION:
In order to prevent clutch slippage (since
the engine oil also lubricates the clutch),
do not mix any chemical additives. Do
not use oils with a diesel specification of
“CD” or oils of a higher quality than
specified. In addition, do not use oils
labeled “ENERGY CONSERVING II” or
higher.
Make sure that no foreign material enters
the crankcase.
9. Start the engine, and then let it idle for
several minutes while checking it for oil
leakage. If oil is leaking, immediately
turn the engine off and check for the
cause.
10. Turn the engine off, wait at least ten
minutes, and then check the oil level and
correct it if necessary.
11. Install the console.
To Next Page
Loading...
