4-13
On-Command Four-Wheel-Drive Switch
“2WD/4WD”
1. Select lever
2. On-Command four –wheel-drive switch “2WD/4WD”
To change from 2WD to 4WD
stop the vehicle, be sure the select lever is
set to position ，and then set the switch to
“4WD”. When the vehicle is in 4WD, the
4WD indicator “ ” will come on in the
multi-function display.
To change from 4WD to 2WD
stop the vehicle, and then set the switch to
“2WD”。the 4WD indicator “ ” will go out in
the multi-function display.
On-Command Differential Gear Lock
Switch “2WD/UNLOCK”
1. On-Command differential lock switch “2WD/UNLOCK”
2. Select lever
To Next Page
Loading...
