Master MSPG-8000 - Page 5

Slot Type Multi Video Signal Generator MSPG-8000
www.Ltdmaster.com 5
1.3.2 The Power Cord
 Always take hold of the molded part of the plug when disconnecting the power cord.
 Use permissible AC Power and Connection Cable. If you use unlicensed Cable, the video signal
generator can cause electric shock.
 Do not use force to bend the power cord or bunch it up for use. Doing so may cause fire.
 Do not place heavy objects on top of the power cord. Doing so may damage the cord causing a fire or
electrical shock.
1.3.2 The Generator
 Do not place the video signal generator at the ferromagnetic body area. The generator can cause
electric shock as irregular working.
 Do not subject the generator to impact or throw it. Doing so may cause the generator to malfunction,
explode or generate abnormally high levels of heat, possibly resulting in a fire.
 Do not use outdoors.
 Do not place the signal generator long time in a car on hot day or cold day. It is able to cause
characteristic decrease, function inferiority and shape variation of outside parts. If you place the
condition continuously, it can case electric shock and fire as short circuit or insulation.
 When you not using the video signal generator for a long time, disconnect AC Power plug from AC line
outlet for safe consideration.
 Do clean the FAN regularly.
 Wipe the cabinet with a dry cloth to eliminate dust.
 Be clean with the cleaner. Do not use benzene. If you use the benzene, the video signal generator is
changed shape variation of outside parts and the works is erased.
 This generator contains some high-voltage parts. If you touch them, you may receive an electric shock
and burn yourself so do not attempt to disassemble, repair or remodel the generator.
 When occurring the malfunction or breakdown, don't disassemble the video signal generator by yourself.
Contact our company promptly.
 Set the video signal generator more 10cm from wall. It can obstruct the flowing of air. And it causes fire
because high temperature.
1.3.3 Installation
 Install the generator in a stable location. Do not stand it on either of its side panels. Doing so may cause
the generator's temperature to rise due to heat generation, possibly resulting in malfunctioning.
 Don't install signal generator vertically.
 Install signal generator at flat place.
 Do not spill liquids inside the generator or drop inflammable objects into it. Operating the generator
under these conditions may cause a fire, electrical shock or malfunctioning.