Master MSPG-8000 - Foreword; Safety Precautions; Notice for Safe Usage

Slot Type Multi Video Signal Generator MSPG-8000
www.Ltdmaster.com 4
Chapter 1. Safety Notice
1.1 Foreword
 Thank you for purchasing the MSPG-8000 video signal generator.
 This manual provides details on how to operate the MSPG-8000 and the precautions to be needed when
doing so.
 Take the time to read through this manual before attempting to operate the MSPG-8000.
 After reading this manual, keep it in a safe place for your future reference.
1.2 Safety precautions
 Improper handling may lead to accidents.
 We recommended you to read through following warning, precaution and information's without fail before
attempting to operate the MSPG-8000.
 These instructions to ensure that you will operate the MSPG-8000 properly.
 Don't install signal generator in dusty environment.
 Attention before connect between video signal generator and display instrument.
 Make sure to connect ground line to FG video signal generator.
 Ground connection plays an important role in protecting internal IC's and elements of video signal
generator.
 Take special care when connecting the generator to display unit.
 If these are not connect together, the generator may fail.
 Setup time for stable system
 System needs about 5 minutes setup time for measuring precise data.
 Fuse re-placement: The fuse is a F3.15AL 250V "F" type.
1.3 Notice for safe usage
 If the equipment is used in a manner not specified by the manufacture, the protection provided by the
equipment may be impaired.
1.3.1 AC Power
 Turn off power of signal generator when inserting a power plug in a socket.
 Don't use harmed power cable and loose socket.
 Separate power cable from a heating apparatus.
 Please, use power switch if you want to turn off signal generator.
 Use the three-wire power supply code.
 If you use unlicensed Cable, the video signal generator can cause electric shock.