Masterclock GMR5000 - Telnet and SSH Default Settings



MasterclockGMRUserManualv2–2016.12
41
TelnetandSSHDefaults

Firmwareversion4.5.0

DISPLAY:
Brightness=12outof15
Dateformat=MM/DD/YY
Timeformat=24hour,Local
Leadingzeros=OFF
DayofYear=OFF
Dashesenabled,appearafterdeviceisunlockedfor86400seconds

NETWORKCONFIGURATION:
DHCP=on
IPV4address,IPV6address,Netmask,GatewayandDNS
setbyDHCPserver.

COMMUNICATIONSCONTROL:
Telnet:
Telnet=OFF

SNMP:
Agentstate=RUNNING
Contact=BLANK
Location=BLANK
Name=BLANK
Community2=BLANK
CurrentCommunity=0
TrapReceivers0through5=BLANK

INPUTCONTROL:

NTPClient:
 State=NOTENABLED
 Query
NTPServerForTime=ON
 ListenForNTPviaBroadcastAddress=OFF
 ListenForNTPviaMulticastAddress=OFF
 UseNTPserverprovidedbytheDHCPserver=OFF
 PrimaryNTPserver=BLANK
 SecondaryNTPserver=OFF
 IgnoreNTPresponsewhenthealarm
flagisset=OFF
 MicrosecondOffset=0

TimeCodeReader:
SMPTE:
 Ignoredateonincomingtimecode=OFF
 DateusesLeitchdateencodingformat=ON
DateusesSMPTE309Mencoding.=OFF
 DateusesSMPTE309Mencoding.=OFF
IRIGTimeCodeSettings:
Ignore
DayofYearandYearonincomingtimecode.=OFF
 IncomingTimeCodeReference:
 UTC=OFF
Local=OFF
Custom=OFF