Ballast Settings Page
This screen provides the ability to con-
trol the ballast ll and drain times.
Connects to GPS
Choices are [YES] and [NO].
NOTE: If NO is selected, a paddle wheel
offset eld is provided. If set to YES, there
is no Paddle Wheel Offset eld.
Paddle Wheel Offset
Sets the paddle wheel offset.
NOTE: Only available if GPS is not
connected.
Service Information
The set of screens provides the ability
for the user to view the software versions.
In addition, it allows the dealer to reset the
oil change and the dealer service schedule.
NOTE: The Dealer Service Reset re-
quires a dealer code to be entered before
gaining access to the screens.
Software Version
This screen is an information-only
screen that provides the following:
• Application version and part number
• Operating system version and
part number
• Bootloader version and part number
• Software version
Dealer Service Reset
This is a dealer-only screen that provides
the dealer with a method to reset the engine
hours for service. Engines are required to
have service every 100 hours of operation.
When the 100 engine hours is reached, an
alert is displayed to alert the boat owner/op-
erator to perform the necessary maintenance.
Page 3-28 2014 MasterCraft Owners Manual • Gauges & Video Screens
G A U G E S & V I D E O S C R E E N S
To Next Page
Loading...
Need help?
General
