Matica MC-L2 - Loading Lower Cleaning Roller & Films; Loading the Lower Cleaning Roller

Matica Lamination Module MC-L2 User Manual
15
USB Port Used to connect the laminator and other devices using the USB c
RS232C Port Used to connect the laminator and other devices using the RS232
AC Power Port Supplies power to the laminator using the AC power cable.
Air Vent Circulates air to keep the temperature under control.
Knob Rotate the knob to remove a jammed card.
RFID Antenna Cover Used to keep the RFID antenna in place.
RFID Antenna .
Lower Film Cartridge Used to load the lms in the lower side.
Cartridge Load/Eject Button Used to remove or replace the cartridge.
Card Slot Insert the cards to be laminated.
Name Description
Upper Cartridge Cover
Used to protect the upper cartrigde when not in use.