Matica MC310 - Monochrome Option

4-4
User Guide
MC310 USER GUIDE I 5-17
Step 5: Once rewritable option is activated in printer, come back to print tab of MC310 printer properties. Select
Rewritable card type & select Erase before print option. Click Ok.
Step 6: Print the document to be printed on the rewritable side of the rewritable card.
5.1.1.4 Card back Setting tab
Panel Mode setting: based on type
of ribbon added inside the printer for
printing, the user allowed set color,
monochrome & overlay option for
back
side printing on card.
Panel Adjustment: using this option
the user can select Automatic &
manual setting of Brightness,
Contrast & Sharpness.
Automatic: Default setting available.
Manual: By selecting this option the
user can vary the brightness
contrast & sharpness, based on the
print image requirement.
Monochrome option: This option allows the user to set the contrast,
Half tone for monochrome panel and Resin area Extraction.
Overlay option: This option allows the user to set contrast for
overlay panel and overlay area setting.