Matica MC310 - Printer Has Problem with Ribbon; Chip Encoding Problems

MC310 USER GUIDE I 7-3
7.3 Magnetic Encoding
The Magnetic Encoder is an optional module for the MC310 Series that allows the encoding of magnetic
cards.
The following modules are available:
 MAG ENCODER
It allows you to perform the encoding magnetic in ISO/ JIS2 format Code PR10300001
Install the module according to the instructions contained in the package.
7.3.1 Configuration
Warning: Before proceeding with the configuration of the module make sure the printer is turned on and
connected to your computer via USB.
Note: Refer 5.1.1.5 of this document for Mag encoding setting & mag encoding tool tab.
Sample Encoding format in the document:
Layout test for sending data to track 1: 1:ABCDEFGHIJKL1234;
Layout test for sending data to track 2: 2:123456789456789999;
Layout test for sending data to track 3: ~3:123456789342567;