4.1.2.2
Static IP
Follow the below steps for setting Static IP for MC320 printer
1.
Ensure the driver installed using USB connection in Laptop/PC. Switch ON the printer & connect to the USB port.
2.
Connect the LAN to printer along with USB & switch OFF & ON the printer. Ensure the PC/ Laptop also connect to
same LAN connection.
3.
In the PC/Laptop go to devices & printers and right click using mouse on MC320 printer icon installed in
the PC/Laptop. Select printer properties from drop down menu.
4.
In MC320 printer properties, click network tab.
5.
Network configuration tab appears. Note down the IP address & set DCHP to OFF condition. Click Apply
& than OK.
Note: If User need to change the IP address then set the DCHP to OFF state & change the IP address &
gate way address. Click apply & than OK.
To Next Page
Loading...
