Matrix ETERNITY NE Quick Start 17
• If you want to use a Headset (not supplied) with your phone, you may plug a
headset with a 2.5 mm single connector in to the headset jack on the left side
panel of the phone.
OR
• You may plug a headset with an RJ11 connector in to the headset port at the
bottom of the phone.
• Connect the LAN Port of SETU VP248 to the LAN Switch/Hub.
• To connect your phone to a computer on your desk, use an Ethernet cable (not
supplied with this phone). Connect the PC Port of the phone with LAN Port of
the computer.
• Plug the connector of the Power Adapter in to the power jack
1
.
1. The SETU VP248 does not have a power switch.
To Next Page
Loading...
