PROGRAMMING AND OPERATION
26
Paced Dispense. Step 4 can also be performed as a paced
dispense. Instead of pressing the trigger for each dispense step,
press and hold the trigger to automatically dispense each volume.
Immediately after each dispense step, the pipettor emits a single
beep tone (if the beep tone is on), prompting you to prepare for the
next dispense step. To stop a paced dispense, release the trigger
before the end of the last dispense step.
Note: For paced dispensing of small volumes, set the pace to
SLOW. Ensure that you have fully released the trigger before the
end of the last dispense step to prevent an additional, unwanted
dispense step.
To Next Page
Loading...