Hi‐TCentralizedcontroller
10
Inaddition,directlyonthehomepage,youcangetthefollowinginformationaboutthefancoils:
• Presenceoffancoilsconnectedinanetwork,ifthesymbolappears(Figure8.Fancoilnetwork.);
• Dehumidificationfancoiloperation,ifthesymbolofthedropsappears(Figure9.Fancoil
dehumidification.).
Figure8.Fancoilnetwork.
Figure9.Fancoildehumidification.
3.4.1 CHILLERSCREEN/HEATPUMP
Fromthemainpage,bytouchingthesymbolofthechiller(sensitiveareanumber1,Figure5.Homepage–indicationmeanings.),
youcanaccesstothechilleronnetworkscreen.
From here you can access to the information related to the operations of the chiller; then you can uniquely identify
each chiller
present,assigningeachaname.
Figure10.Chillerpage–informationandsensitiveareas.
Theinformationinthechiller’spageare:
1. Temperaturereadinthechiller(abouttoaspecificchiller):
a. Airtemperature(°C)
b. Inletwatertemperature(°C)
c. Outletwatertemperature(°C)
2. Statusandoperationmodeaboutaspecificchiller
3. Active/activablefunctions(inthescrollbaronthe
left)
Sensitiveareas(indicatedbyredboxesinthefigure)inthispageare:
1. Chillername(eachtimeyoupressonit,yougotothenextchillerunitinthenetwork;otherwise,withprolongedpressure,
youcanrenamethechiller)
2. Chiller/heatpump(withworkingsignallingfunctiongiven
bytherotationofthefans);fromhereyouaccesstoanadditional
pageofinformationaboutthatspecificchiller.
3. Activealarmsintheunitdisplayed
7. Iconsofthenavigationsidebar
8. Iconsofthenavigationsidebar
5
3
7
4
1
2
6
8
9
To Next Page
Loading...