MAXA i-32V5C MIDI 0121 - Accessing the Inner Parts; Costumised Chapters for each Series

i-32V5 MIDI Chillers and Inverter Air/Water heat pumps with axial fan
16
Models
Shipping
weights [kg]

weights [kg]
A [mm] B [mm] Xb [mm] Yb [mm]
i-32V5H Midi 0121,
0126
250 240 640 1600 949 322
i-32V5C Midi 0128,
0132
225 215 640 1600 970 332
i-32V5H Midi 0128,
0132
265 255 640 1600 912 325
The ideal installaon posions of the dampers for each type of machine are shown in the below images.
P1 P2
P3 P4
329
309
ACCESSING THE INNER PARTS

[ 1 ]
[ 2 ]
A
B
1. Remove the two access panels to the components compartment by removing the screws as shown in gure 1.
2. To access the power supply terminal block, remove panel A by unscrewing the screws as shown in gure 2.
3. To access the user terminal block, remove panel B by unscrewing the screws as shown in gure 2.
4. Insert the cables in the cableshot provided on the rear side of the machine to connect them to the system.
5. Close the electrical panel and the access panels to the machine components compartment using the screws previously removed.