MAXA i-32V5C MIDI 0121 - Control Logics; Fuses

23
i-32V5 MIDI Chillers and Inverter Air/Water heat pumps with axial fan

XLF-1
XNF-1
XLF-1
XNF-1
XF-3
XF-2
XF-1
XF-3
XF-2
XF-1
XP-1.1 XP-2.1 XP-3.1 XP-4.1 XP-5.1
XP-1.2 XP-2.2 XP-3.2 XP-4.2 XP-5.2
XP-1.1 XP-2.1 XP-3.1 XP-4.1 XP-5.1
XP-1.2 XP-2.2 XP-3.2 XP-4.2 XP-5.2
X12-1 X12-2
X12-1 X12-2
XC-2.1 XC-1.1 XC-3.1
XC-4.1 XC-5.1 XC-6.1 XC-7.1 XC-8.1
XC-1.2 XC-2.2 XC-3.2
XC-4.2 XC-5.2 XC-6.2 XC-7.2 XC-8.2
XC-10.1
XC-9.1 XC-9 .2
XC-10.2
XC-2.1 XC-1.1 XC-3.1
XC-4.1 XC-5.1 XC-6.1 XC-7.1 XC-8.1
XC-1.2 XC-2.2 XC-3.2
XC-4.2 XC-5.2 XC-6.2 XC-7.2 XC-8.2
XC-10.1
XC-9.1
XC-9.2 XC-10.2
XC-11.1 XC-11.2XC-11.1
XC-11.2

Terminal  
XP-6.1/6.2 Compressor indicaon
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resisvi, 1 A inducves.
XP-7.1/7.2 Alarm indicaon
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resisvi, 1 A inducves.
XP-8.1/8.2 Block indicaon
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resisvi, 1 A inducves.
XP-9.1/9.2 Season indicaon
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resisvi,1 A inducves.
XP-10.1/10.2 Defrost indicaon
Changeover contact, single-phase voltage
230Vac, 50Hz, 5A resisvi, 1 A inducves
XLF-1
XNF-1
XLF-1
XNF-1
XF-3
XF-2
XF-1
XF-3
XF-2
XF-1
XP-1.1 XP-2.1 XP-3.1 XP-4.1 XP-5.1
XP-1.2 XP-2.2 XP-3.2 XP-4.2 XP-5.2
XP-1.1 XP-2.1 XP-3.1 XP-4.1 XP-5.1
XP-1.2 XP-2.2 XP-3.2 XP-4.2 XP-5.2
X12-1 X12-2
X12-1 X12-2
XC-2 .1 XC-1 .1 XC-3 .1
XC-4 .1 XC-5 .1 XC-6 .1 XC-7 .1 XC-8 .1
XC-1 .2 XC-2 .2 XC-3 .2
XC-4 .2 XC-5 .2 XC-6 .2 XC-7 .2 XC-8 .2
XC-1 0. 1
XC-9 .1 XC-9.2
XC-1 0. 2
XC-2 .1 XC-1 .1 XC-3 .1
XC-4 .1 XC-5 .1 XC-6 .1 XC-7 .1 XC-8 .1
XC-1 .2 XC-2 .2 XC-3 .2
XC-4 .2 XC-5 .2 XC-6 .2 XC-7 .2 XC-8 .2
XC-1 0. 1
XC-9 .1
XC-9 .2
XC-1 0. 2
XC-1 1. 1 XC-11.2XC-1 1. 1
XC-1 1. 2
XP-7.1 XP-8.1 XP-9.1
XP-10.1
XP-7.2 XP-8.2 XP-9.2
XP-10.2
XP-6.1
XP-6.2
XP-7.2 XP-8.2 XP-9.2
XP-10.2
XP-6.2
XP-7.1 XP-8.1 XP-9.1
XP-10.1
XP-6.1

For further informaon on the control logics, please refer to the relave manual which can be requested from CAT or the manufacturer.
Fuses
Details on the type and nominal specicaons of the fuses are set out on the machine’s data plate, on electrical schemes as well as on the fuses..