MAXA i-32V5C MIDI 0121 - User Interface - Controller

i-32V5 MIDI Chillers and Inverter Air/Water heat pumps with axial fan
38
DOMESTIC HOT WATER MODE
20
25
30
35
40
45
50
55
60
65
-25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45
Tw [°C]
Ta [°C]
Envelope sanitario
14. 
The unit includes a display placed underneath a hinged polycarbonate transparent door with a protecon rang of IP67.
The interface has a part with variable text and a series of icons idenfying operaon of the unit as shown in the table below.
Cooling mode led: led ON if unit is in COOL or COOL+SAN mode.
Heang mode led: led ON if unit is in HEAT or HEAT+SAN mode.
Pump led: led ON if pump running.
Alarm led: led ON if an alarm is triggered.
Defrost led: led ON if defrosng enabled, OFF if defrosng disabled or nished, FLASHING if defrosng me interval count in
progress.
Compressor led: led ON if the compressor is running, OFF if the compressor is o, FLASHING if pending the med compressor
start.
Domesc hot water led: led ON if COOL+SAN or HEAT+SAN mode enabled, OFF if sanitary mode disabled, FLASHING if DHW
producon in progress.