i-32V5 MIDI Chillers and Inverter Air/Water heat pumps with axial fan
6
3. PERMITTED USE
• The company excludes any contractual and extra contractual liability for damage caused to persons, animals or objects, by incorrect instal-
laon, seng and maintenance, improper use of the equipment, and the paral or supercial reading of the informaon contained in this
manual.
• These units are built for the heang and/or cooling of water. Any other use not expressly authorised by the manufacturer is considered
improper and therefore not allowed. The uid to be used is exclusively water or a mixture of water and glycol in case of low water tempera-
tures
-
• • All the work must be executed by skilled and qualied personnel, competent on the exisng regulaons in country of installaon The
installaon place and the water and electric circuit must be established by the plant designer and must take into account both technical
requirements as well as any applicable local laws and specic authorisaons.
• All the work must be executed by skilled and qualied personnel, competent on the exisng regulaons in country of installaon.
• This appliance is intended to be used by expert or trained operators in shops, light industry and in factories, or for commercial use by
non-expert personnel
• The appliance may be used by children at least 8 years old and by persons with reduced physical, sensory or mental capabilies or without
experience or the necessary knowledge as long as they are supervised or aer they themselves have received instrucons on the safe use
of the appliance and understand the relevant dangers. Children must not play with the appliance. The cleaning and maintenance which the
user is expected to carry out on the unit cannot be done by children without supervision.
• Direct interacon with the device by people with electrically controlled medical devices, such as pacemakers, is forbidden, as harmful in-
terference may be created. It is recommended to keep adequate distance from unit installaon, as indicated by the medical system used.
4. GENERAL SAFETY GUIDELINES
Before starng any type of operaon on the units, every operator must be perfectly familiar with the operaon of the machine and its controls
and must have read and understood all the informaon in this manual.
-
To Next Page
Loading...
