Table 4. Software Security Features (continued)
To control access to using the system, set a user password and enable it through
To disable a password, change it to a blank entry or press CTRL-D in the Change
menu of the User Password Option menu found in the Security
To clear the password if you cannot access Setup, change the Clear Password
The system can boot with or without a keyboard. During POST,
system completes the boot sequence, the BIOS automatically detects and tests
the keyboard if it is present and displays a message.
The sequence that you specify in setup will determine the boot order. If secure
mode is enabled (a user password is set), then you will be prompted for a pass-
word before the server fully boots. If secure mode is enabled and the secure
Mode option is also enabled, the server will fully boot but will require a
password before accepting any keyboard or mouse input.
To Next Page
Loading...
