MAXDATA PLATINUM - Using the Intel Server Management; Installing Intel Server Management

46
Configuration Software and Utilities
Using the Intel
®
Server Management

NOTE
Prior to installation, uninstall any previous version of Intel
®
Server Management.
Intel
®
Server Management
and the hard drive Service Partition provide real-time monitoring
and alerting for your MAXDATA server hardware, emergency remote management, and
remote server setup. Intel
®
Server Management is implemented by installing it within client-
server architecture.
The Service Partition provides you with the ability to remotely access a local partition on the
server and to identify and diagnose server health issues. Remote access is provided through
either a modem or network connection.
To get started with Intel
®
Server Management, install the Service Partition first. After the
service partition is installed, install operating system, and then Intel
®
Server Management.
The information here describes installation on a system running a Microsoft
®
Windows
®
operating system.
Installing Intel
®
Server Management
You can install Intel
®
Server Management
on a local server or on a remote workstation that
is used to manage a LAN/WAN.
1.
Insert the Intel
®
Server Management CD into the system CD-ROM.
2.
Click Install Server Management.
3.
Select the applicable system option.
4.
Review the Intel Software License Agreement and click Accept.
5.
If installing to a local server, click Install Now. If this is a multiple system installation,
click Add to compile a list of systems and then click Install Now.
6.
Select Reboot Now or Reboot Later.
7.
Remove the Intel
®
Server Management CD.