MAXDATA PLATINUM Server Board
Table 12. Post Codes (continued)
Check Stuck Key Enable Keyboard: The keyboard controller inter-
face test completed. Writing the command byte and initializing the
Disable parity NMI: The command byte was written and global
data initialization has completed. Checking for a locked key next.
Verify RAM Size: Checking for a memory size mismatch with
Check ATA Cable Type presence of ATAPI devices.
Display Keyboard Message.
Display IDE mass storage devices.
Display USB mass storage devices.
Report the first set of POST Errors To Error Manager.
Boot Password Check: The password was checked. Performing
any required programming before Setup next.
Set Printer RS-232 Timeout.
Init FDD Devices: Resetting the hard disk controller next.
Lock out PS/2 keyboard/mouse if unattended start is enabled.
Init Boot Devices: The adapter ROM had control and has now re-
turned control to BIOS POST. Performing any required processing
after the option ROM returned control.
Float Processor Initialize: Performing any required initialization
before the coprocessor test next.
Enable Interrupts 0,1,2: Checking the extended keyboard, key-
board ID, and NUM Lock key next. Issuing the keyboard ID
Report second set of POST errors To Error messager.
Prepare And Run Setup: Error manager displays and logs POST
errors. Waits for user input for certain errors. Execute setup.
Set Base Expansion Memory Size.
Adjust Setup: Programming the Setup options next.
Build SMBIOS table and MP tables.
Program hotkey and timeout settings in keyboard controller.
Processor initialization before boot.
Copy required language strings to shadow RAM.
To Next Page
Loading...
