Maxell MP-JU4001 - Page 106

106
QM00991-1
Presentation tools
PC-LESS Presentation (continued)
You can play the Slideshow at your desired conguration.
Congure the Slideshow items in the Thumbnail.
1) RETURN :
Returns to the thumbnail mode.
2) PLAY : Plays the Slideshow.
3) START : Sets the beginning number of the
Slideshow.
4) STOP : Sets the end number of the Slideshow.
5) INTERVAL : Sets the interval time for displaying still
images during the Slideshow.
It is not recommended to set the interval
time very short like several seconds, because
it may take more than several seconds to
read and display an image le if it is stored in
very deep layer directory or if so many les
are stored in the same directory.
6) PLAY MODE : Selects the Slideshow mode.
ONE TIME : Plays the Slideshow one time.
ENDLESS : Plays the Slideshow endlessly.
• The settings of the Slideshow are saved to the “playlist.txt” le
that is stored in the storage media. If the le is not existed, it is generated
automatically.
• The settings for the START, STOP, INTERVAL, and PLAY MODE are saved to
the Playlist.
• If the storage media is under the write protection or the “playlist.txt” is the
read-only type le, it is impossible to change the settings of the Slideshow.
NOTE