110
QM00991-1
Maintenance
Other care
To ensure the safe use of your projector, please have it cleaned and inspected by
your dealer about once a year.
1.
Turn the projector o, and unplug the power cord. Allow the projector to cool
suciently.
2.
After making sure that the projector is cool adequately, wipe lightly the lens
with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
If the lens is awed, soiled or fogged, it could cause deterioration of display
quality. Please take care of the lens, being cautious of handling.
Inside of the projector
Caring for the lens
• Use commercially available lens tissue to clean the lens (used to clean cameras,
eyeglasses, etc.).
• If the lens is heavily soiled, wipe it with a cloth moistened with little water.
• Never use polishing agents, detergents, chemicals, or solvents such as benzine
or thinner.
• Excepting for lens, use a soft cloth to clean. When excessively soiled, dilute a
neutral detergent in water, wet and wring out the soft cloth.
To Next Page
Loading...
